Download Print this page

Sony BKM-FW50 Service Manual page 10

Network receiver adaptor
Hide thumbs Also See for BKM-FW50:

Advertisement

2. Master/Sub setting window
Master/Sub can be set when you press the [Settings]
button.
Sub
Sub
Sub
Sub
Sub
Sub
Sub
Sub
Sub
. Master/Sub selection radio button:
Press this button to select Master or Sub.
n
Sub cannot be set when the check box for Master has
been selected.
Master cannot be set when the check box for Sub has
been selected.
. ON/OFF radio button of Master > Sub Data Copy
function:
Press this button to select ON or OFF of a Master > Sub
Data Copy function.
. ON/OFF radio button of Master/Sub Sync Play function:
Press this button to select ON or OFF of a Master/Sub
Sync Play function.
. Master Settings:
A maximum of five Sub IP addresses can be registered.
. Sub Setting:
Master IP Address: Specify the IP address of Master.
n
This item operates even if Sub is not set because it
operates according to only the instructions from Master.
2-4
3. Master/Sub Copy window
Copy can be set when you press the [Copy] button.
Sub
Sub
Copy can be set in the same way as for Store Local.
. Browse button: Browses the store source folder of
Master.
n
The store destination folder of Sub cannot be browsed.
. Store button: Copies data sequentially from Master to
Sub.
. Time setting of Scheduled Copy
Can set as in the conventional Scheduled Download
function.
Caution of operation
A download start command cannot be transmitted from
Master when Sub is not started. Therefore, Master BSP15
transmits a Power ON command to Sub FW32 to turn on
the power.
Sub
BKM-FW50

Advertisement

loading