Bosch rexroth IndraControl VAC 08.1 Operating Instructions Manual page 14

8/33
Ambient conditions
Mechanical strength
Contamination level
Tab. 6-1: Ambient conditions
NOTICE
Due to the risk of corrosion, avoid sulphurous gases (e.g. sulphur dioxide (SO
and hydrogen suphide (H
NOTICE
The ambient air must not contain acids, alkaline solutions, corrosive agents,
●
salts, metal vapors and other electrically conductive contaminants in high
concentrations
The devices to be installed into the housing and installation compartments
●
must at least comply with the degree of protection IP 54 according to DIN EN
60529.
The device shall be provided in a suitable fire enclosure in the end-use appli-
●
cation.
Bosch Rexroth AG R911400465_Edition 01
In operation
Maximum vibration
Frequency range:
10 Hz to 150 Hz
Excursion:
0.75 mm at 10 Hz to
57 Hz
Acceleration:
1 g at 57 Hz to 150 Hz
Test duration per axis:
10 frequency cycles
Frequency throughput
speed:
1 octave/min
Acc. to EN 60068-2-6,
test Fc
2
Defective product due to gases jeopardizing
functions
S)). The product is not resistant against these gases.
2
Failure of the product due to contaminated air
IndraControl VAC 08.1 CDI+ Splitter
Transport
Max. shock:
15 g acc. to EN 60
068-2-27, no disturb-
ance of the function
2
Storage
Max. shock:
15 g acc. to EN 60
068-2-27, no disturb-
ance of the function
2
2
)