1. Manuals
  2. Brands
  3. ABB Manuals
  4. Battery Charger
  5. EVLUNIC PRO M
  6. Configuration manual

ABB EVLUNIC PRO M Configuration Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

—
E VLU N IC PR O M
Charging Station
Configuration manual V 1.02
STATUS
Released
© Copyright 2019 ABB. All rights reserved.
DOCUMENT ID.
TBA
CHARG ING STATIO N
REV.
LANG.
PAGE
A
EN
1/37

Advertisement

Table of Contents
loading

Related Manuals for ABB EVLUNIC PRO M

Summary of Contents for ABB EVLUNIC PRO M

  • Page 1 CHARG ING STATIO N — E VLU N IC PR O M Charging Station Configuration manual V 1.02 STATUS DOCUMENT ID. REV. LANG. PAGE Released 1/37 © Copyright 2019 ABB. All rights reserved.

  • Page 2: Table Of Contents

    4.4. UDP interface ............................... 31 4.5. Integration of external meters ........................31 5. Maintenance ..............................35 5.1. Diagnosis and troubleshooting ........................35 5.2. Software update ..............................35 STATUS DOCUMENT ID. REV. LANG. PAGE Released 2/37 © Copyright 2019 ABB. All rights reserved.

  • Page 3: Introduction

    1. Introduction This document refers to the following devices: EVLunic Pro M with software version 1.8 or a later version of the software The device variant can be determined by the product designation on the type plate. The software version can be read out via the web interface. For more information, see the "operating instructions".

  • Page 4: Representation Of Safety Instructions

    This symbol reminds you of the possible consequences of touching electrostatically sensitive components. Information Identifies practical tips and useful information. No information that warns about potentially dangerous or harmful functions is contained. STATUS DOCUMENT ID. REV. LANG. PAGE Released 4/37 © Copyright 2019 ABB. All rights reserved.

  • Page 5: Purpose Of The Document

    CHARG ING STATIO N 1.2. Purpose of the document This document describes the configuration of the advanced features of EVLunic Pro M after it has been installed. This includes, among other things, the description of the settings in the web interface.

  • Page 6: Notes On This Document

    1.5.1. Contents of the document • Configuration of the advanced features of EVLunic Pro M 1.5.2. Not contained in this document • Commissioning and deinstallation of the charging station •...

  • Page 7: Further Documentation

    CHARG ING STATIO N 1.6. Further documentation Manuals and additional information are available on the ABB website: new.abb.com/ev-charging Designation Target group Operating instructions • End customer • Electrician Installation manual • Electrician UDP Programmers Guide • Programmer • End customer •...

  • Page 8: System Overview

    5 Higher-level network/Internet 6 OCPP backend Only EVLunic Pro M can be operated as master charging stations; only EVLunic Pro S can be operated as slave charging stations. The following chapters describe which network interfaces EVLunic Pro M (master charging station) provides and how to set up a master/slave network.
  • Page 9 CHARG ING STATIO N 2.1.1. LAN EVLunic Pro M can be connected to a router via the integrated LAN interface. The router provides a connection to an OCPP backend over the Internet. 1 EVLunic Pro M 2 Router 3 Internet 4 OCPP backend Connection: Ethernet1-Anschluss (LSA+®)
  • Page 10 CHARG ING STATIO N 2.1.2. WLAN (optional) EVLunic Pro M can be connected to a router via the integrated WLAN interface. If the router is connected to the Internet, a connection to an OCPP backend can be made. 1 EVLunic Pro M...
  • Page 11 2.1.3. WLAN Access Point (Hotspot) (optional) EVLunic Pro M can be connected to a mobile device via the integrated WLAN access point. With the mobile device, the web interface can be easily accessed and the configuration of the charging station can be performed.

  • Page 12: Design Of A Local Charging Network (Master/Slave)

    2.2. Design of a local charging network (master/slave) A local charging network includes one EVLunic Pro M as master and up to 15 EVLunic Pro S as slaves. Depending on the number of slave charging stations, the design of a local charging network is implemented differently: •...
  • Page 13 The connection of the charging station to the router/switch is made via LAN — Fig. 2-4: Connection via router or switch 1 Router/Switch 2 EVLunic Pro M (master) 3 EVLunic Pro S (slave) STATUS DOCUMENT ID. REV. LANG. PAGE Released 13/37 © Copyright 2019 ABB. All rights reserved.
  • Page 14 Within the network Transfer of the software update (Bootps) Within the network Transfer of the software update (Bootps) Within the network Transfer of the software update (Bootps) STATUS DOCUMENT ID. REV. LANG. PAGE Released 14/37 © Copyright 2019 ABB. All rights reserved.

  • Page 15: Configuration

    ON/OFF position of the rocker switches The illustration shows the position of the rocker switches for the setting ON and OFF STATUS DOCUMENT ID. REV. LANG. PAGE Released 15/37 © Copyright 2019 ABB. All rights reserved.
  • Page 16 To restart, press the "Service button" until the first beep (approx. 1 second) or switch off the charging station for a short time via the line circuit breaker STATUS DOCUMENT ID. REV. LANG. PAGE Released 16/37 © Copyright 2019 ABB. All rights reserved.

  • Page 17: Configuration Via Web Interface

    For security reasons, change the password after the initial login. Fig. 3-5: Configuration label STATUS DOCUMENT ID. REV. LANG. PAGE Released 17/37 © Copyright 2019 ABB. All rights reserved.
  • Page 18 The following chapters provide an overview of the possibilities of the web interface. A detailed description of the individual configuration options can be found directly next to the respective configuration entry. STATUS DOCUMENT ID. REV. LANG. PAGE Released 18/37 © Copyright 2019 ABB. All rights reserved.
  • Page 19 The currently installed software versions are displayed. A software update can also be performed here. GSM Info Information about the GSM connection is displayed and the connection to the set GSM network can be tested. STATUS DOCUMENT ID. REV. LANG. PAGE Released 19/37 © Copyright 2019 ABB. All rights reserved.
  • Page 20 The serial number is printed on the rating plate of the slave charging station. STATUS DOCUMENT ID. REV. LANG. PAGE Released 20/37 © Copyright 2019 ABB. All rights reserved.
  • Page 21 All the necessary configurations for using a proxy server can be found in this part. OCPP All the necessary configurations for connecting to an OCPP backend can be found in this part. STATUS DOCUMENT ID. REV. LANG. PAGE Released 21/37 © Copyright 2019 ABB. All rights reserved.
  • Page 22 If you have forgotten the web interface password, you can reset it with the displayed recovery key. The recovery key can also be found on the configuration label. STATUS DOCUMENT ID. REV. LANG. PAGE Released 22/37 © Copyright 2019 ABB. All rights reserved.

  • Page 23: Enabling The Dhcp Server

    3.5. Configuration in series via USB stick Several EVLunic Pro M can be configured with the same settings. For this purpose, the configuration of one EVLunic Pro M is saved on a USB stick and then transferred to other EVLunic Pro M. Preparation The following tools are required for the configuration via USB stick: •...
  • Page 24 CHARG ING STATIO N 3.5.1. Create configuration If this has not yet been done, a first EVLunic Pro M must be configured with the desired settings. These settings serve as the basis for the configuration of additional EVLunic Pro M.
  • Page 25 "=". Example of a possible adaptation of the configuration Initial configuration Adapted configuration =true =false AuthorizationEnabled AuthorizationEnabled Information Invalid settings will not be applied. STATUS DOCUMENT ID. REV. LANG. PAGE Released 25/37 © Copyright 2019 ABB. All rights reserved.

  • Page 26: Functions

    CHARG ING STATIO N 3.5.4. Import configuration To load the configuration into another EVLunic Pro M, the USB stick must be plugged in to the desired charging station. The configuration will be imported automatically and adopted after a restart. 4. Functions The following chapters describe special functions of the charging station.

  • Page 27: Rfid Authorization

    RFID cards stored locally on is established again, the RFID the charging station. card is checked and the charging process is aborted if an invalid RFID card is used. STATUS DOCUMENT ID. REV. LANG. PAGE Released 27/37 © Copyright 2019 ABB. All rights reserved.
  • Page 28 Both the master RFID card and all slave RFID cards can be taught in directly at the RFID reader of the charging station. To teach in an RFID card, no charging session may be active and no vehicle may be plugged into the charging station. STATUS DOCUMENT ID. REV. LANG. PAGE Released 28/37 © Copyright 2019 ABB. All rights reserved.
  • Page 29 Serial number of the charging station where the RFID card may be authorized. All or only certain charging stations in the charging network can be enabled for the RFID card. STATUS DOCUMENT ID. REV. LANG. PAGE Released 29/37 © Copyright 2019 ABB. All rights reserved.

  • Page 30: Ocpp Backend

    Open Charge Point Protocol (OCPP). OCPP, as an open application protocol, makes it possible to connect any central management system to the charging station regardless of the manufacturer or supplier. STATUS DOCUMENT ID. REV. LANG. PAGE Released 30/37 © Copyright 2019 ABB. All rights reserved.

  • Page 31: Udp Interface

    The charging station offers the possibility of passing information and receiving commands via the User Datagram Protocol (UDP). This can be used, for example, for integration into a Smart Home. For more information, see the "UDP Programming Guide", which is available in the download area on the ABB website.
  • Page 32 DIP switches, the charging station can regulate the charging current in such a way that the maximum energy reference never exceeds the value of the post- meter fuse value. STATUS DOCUMENT ID. REV. LANG. PAGE Released 32/37 © Copyright 2019 ABB. All rights reserved.
  • Page 33 The setting must be made on the DIP switch DSW1. The following DIP switches can only set a maximum value that is less than or equal to the current of the post-meter fuse. STATUS DOCUMENT ID. REV. LANG. PAGE Released 33/37 © Copyright 2019 ABB. All rights reserved.
  • Page 34 To restart, press the "Service button" until the first signal tone sounds (approx. 1 second) or switch off the charging station for a short time via the line circuit breaker. STATUS DOCUMENT ID. REV. LANG. PAGE Released 34/37 © Copyright 2019 ABB. All rights reserved.

  • Page 35: Maintenance

    CHARG ING STATIO N 5. Maintenance 5.1. Diagnosis and troubleshooting The FAQs on the ABB website help to rectify possible errors that might occur: new.abb.com/ev-charging 5.2. Software update It is recommended to always keep the charging station up-to-date, as it contains functional enhancements and bug fixes.
  • Page 36 The software update for the entire charging network can be performed via the OCPP backend. To perform the software update an FTP link is required. The information downloaded from the ABB website along with the software update contains the FTP link.
  • Page 37 USB stick ............... 23 GSM ................. 11 Web interface............17 WLAN ..............10 LAN ................9 WLAN Access Point (Hotspot) ......11 Load management ..........26 STATUS DOCUMENT ID. REV. LANG. PAGE Released 37/37 © Copyright 2019 ABB. All rights reserved.

Table of Contents