Advertisement
1. Checking the Delivered Product
Before using the QFP-100P Probe Header , confirm that the following components are included in
the box:
*1: Referred to as "header board". Header board is mounted on YQPACK100RB (Tokyo Eletech
Corporation), referred to as " YQPACK ".
*2: IC socket manufactured by Tokyo Eletech Corporation, referred to as " NQPACK ", and supplied
with a special screwdriver and three guide pins. A socket offering higher reliability,
NQPACK100RB-SL (Tokyo Eletech Corporation) (sold separately), can be used by making an
IC socket mounting hole on the user system board. For more information, contact Tokyo Eletech
Corporation.
*3: IC Socket cover manufactured by Tokyo Eletech Corporation, referred to as " HQPACK ", with 4
screws for securing HQPACK (M2 x 6 mm , 0.4 mm pitch).
This product functions as an emulator system when it is combined with the emulator.
2. Handling Precautions
The header board is precision-manufactured to improve dimensional accuracy and to ensure reliable
contact. The header board is therefore sensitive to mechanical shock. To ensure correct use of the
header board in the proper environment, observe the following points regarding its insertion and
removal:
• • • •
Avoid placing stress on the NQPACK mounted on the user system board while connecting the
header board.
• • • •
QFP-100P Probe Header
• • • •
Screws for securing header board
(M2 × 10 mm, 0.4 mm pitch)
• • • •
Washer
• • • •
*2
NQPACK100RB
• • • •
HQPACK100RB179
• • • •
Operation manual (Japanese version)
• • • •
Operation manual (English version, this
manual)
: 1
*1
: 4
: 4
: 1
: 1
*3
: 1
: 1
1
Advertisement
