System Connector; Rf Shield - Nokia RH-10 Series Disassembly/Assembly

RH-10
Disassembly / Assembly

System Connector

(Disassemble) Once the radio module has been removed, the system connector is free to
be removed from the B-cover.
NOTE: Take care NOT to touch the springs during assembly or disassembly. Also, do not lay aside
with contacts down.
(Assemble) See the NOTE above for precautions

RF Shield

(Disassemble) The RF shield is free to be removed by grasping at top and bottom (see
photo below), carefully lifting over the battery contact springs. Do not use the center of
shield for removal, as damage to shield springs or battery contact springs may occur.
(Assemble) Great care should be taken to avoid contact with the battery contact springs
and to avoid damage.
Page 8
Nokia Corporation
CCS Technical Documentation
Confidential Issue 1 09/2002