DeWalt DW621 Instructions Manual page 28

EN GLI SH
– Impairment of hearing
– Risk of personal injury due flying particles.
– Risk of burns due to accessories becoming hot
during operation.
– Risk of personal injury due to prolonged use.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
DATE CODE POSITION (FIG. 1)
The Date Code (ff), which also includes the year of
manufacture, is printed into the housing.
Example:
2010 XX XX
Year of Manufacture
Package Contents
The package contains:
1 Router
1 Parallel fence with fine adjustment and
guiderods
1 Collet 8 mm (GB: 1/4")
1 Collet 12 mm (1/2") (DW622)
1 Guide bush 24 mm
1 Wrench # 17 (DW621)
1 Wrench # 22 (DW622)
1 Dust extraction plug
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. 1)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
a. Lock-on/lock-off switch
b. Spindle lock
c. Collet nut
d. Parallel fence locking bolt
26
e. Guide rods for parallel fence
f. Dust extraction outlet in parallel fence
g. Fine adjuster for parallel fence
h. Parallel fence
i. Locking bolt
j. Router base
k. Finger guard
l. Revolver depth stop
m. Depth stop
n. Depth stop locking bolt
o. Plunge limiter
p. Quick adjuster for depth stop
q. Fine adjuster for depth stop
r. Dust extraction adaptor
s. Speed control dial
t. End lock
INTENDED USE
Your D WALT DW621/DW622 high-performance
E
routers have been designed for professional heavy
duty routing of wood, wood products and plastics.
DO NOT use under wet conditions or in presence of
flammable liquids or gases.
These routers are professional power tools.
DO NOT let children come into contact with the
tool. Supervision is required when inexperienced
operators use this tool.
Electrical Safety
The electric motor has been designed for one
voltage only. Always check that the power supply
corresponds to the voltage on the rating plate.
Your D WALT tool is double insulated in
E
accordance with EN 60745; therefore no
earth wire is required.
WARNING: 115 V units have to
be operated via a fail-safe isolating
transformer with an earth screen
between the primary and secondary
winding.
If the supply cord is damaged, it must be replaced
by a specially prepared cord available through the
D WALT service organisation.
E
Mains Plug Replacement
(U.K. & Ireland Only)
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.