8.11
To set PBX Access Code
If the phone is connected to a switchboard, you may need to enter an PBX
Access Code in the dialling sequence to be able to connect to the outside line.
The PBX Access Code will be displayed at the beginning of a number on the
screen. The code can be up to 4 digits long.
The PBX Access Code will not be used when you dial the number manually
(such as when you are not dialling from the phonebook). This allows you to
make calls to other switchboard extensions.
1.
Press Menu, scroll
2.
is highlighted. Press Select.
Set Handset
3. Scroll
to
PBX Access Code
D
4. Scroll
or
U
D
If you select
Set
Save.
n
5. Press
to return to standby mode.
34
to
and press Select.
Settings
D
and press Select.
to Off,
or
On
Set Code
Code, enter the switchboard access code e.g. 9 then press
then press Select.
Handset setting