To Change The Recall Mode; To Change The System Pin - Motorola O2 Manual

4. Scroll or
U D
If you choose
Scroll or
•
U
• Scroll or
U
press Select.
n
5. Press to return to standby mode.
9.5

To change the recall mode

Recall is useful to access certain network services and PABX/switchboard
services.
The default recall mode preset in the phone is suitable for your country
network and therefore you should not need to change it.
Note
The use of the phone cannot be guaranteed on all PABX.
1. Press Menu, scroll
2. Scroll to
Set Base
D
3. Scroll to
Recall Mode
D
4. Scroll or
U D
n
5. Press to return to standby mode.
9.6

To change the System PIN

The System PIN is required when changing certain settings and for registration
/ de-registration. The default setting is 0000. You can change this to your own
preferred number (up to 8 digits).
When you enter a PIN, the digits are shown as ******** .
1. Press Menu, scroll
2. Scroll to
Set Base
D
3. Scroll to
System PIN
D
4. Enter the old PIN (Default setting = 0000) and press OK.
5. Enter the new PIN and press OK.
6. Re-enter the new PIN and press OK.
n
7. Press to return to standby mode.
Note
It is advisable to make a note of your new PIN code and keep it somewhere
safe.
36
to or
All Handsets
Handset, all available handsets are displayed.
Select
to the handset you want then press Select.
D
to the number of rings that you want to set: 2, 4 or 6 and
D
to
D Settings
and press Select.
and press Select.
to or
Recall 1 Recall 2
to
D Settings
and press Select.
and press Select.
then press Select.
Select Handset
and press Select.
then press
Select
and press Select.
to confirm.
Base settings