Safety
Statement 1
Electrical current from power, telephone, and communication cables is hazardous.
To avoid a shock hazard:
Do not connect or disconnect any cables or perform installation, maintenance, or
•
reconfiguration of this product durinig an electrical storm.
Connect all power cords to a properly wired and igrounded electrical outlet.
•
Connect to properly wired outlets any equipment that will be attached to this
•
product.
When possible, use one hand only to connect or disconnect siignal cables.
•
Never turn on any equipment when there is evidence of fre, water, or structural
•
damaige.
Disconnect the attached power cords, telecommunications systems, networks, and
•
modems before you open the device covers, unless instructed otherwise in the
installation and configuration procedures.
Connect and disconnect cables as described in the followinig table when installinig,
•
movinig, or openinig covers on this product or attached devices.
To Connect:
1. Turn everything OFF.
2. First, attach all cables to devices.
3. Attach signal cables to connectors.
4. Attach power cords to outlet.
5. Turn device ON.
Replacing the UPS Front Bezel including LCD
To Disconnect:
1. Turn everything OFF.
2. First, remove power cords from outlet.
3. Remove signal cables from connectors.
4. Remove all cables from devices.
v