Powering Off The Ups Unit; Tools Required - Lenovo 5594-5KX Replacing

Chapter 2 Replacing the Front Bezel Three Phase UPS unit

Powering off the UPS unit

UPS LCD Control Panel
1. Press the
X On/Off
Standby mode
2. Switch the upstream circuit breaker off which protects the UPS unit. This will cut the
utility power to the UPS unit
3. Do not work on the UPS immediately. Wait some 15 minutes before performing any work
on the UPS unit. This will reduce the risk of an electrical accident

Tools required

#10T Torx screwdriver
•
Small fat-head screwdriver
•
16
button on the UPS LCD Control Panel at the front. The UPS goes into
Replacing the UPS Front Bezel including LCD