DeWalt D26200 Original Instructions Manual page 33

Electrical Safety
The electric motor has been designed for one voltage only.
Always check that the power supply corresponds to the voltage
on the rating plate.
Your D WALT tool is double insulated in accordance
e
with EN60745; therefore no earth wire is required.

WARNING: 115 V units have to be operated via a fail-safe
isolating transformer with an earth screen between the
primary and secondary winding.
If the supply cord is damaged, it must be replaced only by
D WALT or an authorised service organisation.
e
Mains Plug Replacement
(U.K. & Ireland Only)
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live terminal in the plug.
• Connect the blue lead to the neutral terminal.

WARNING: No connection is to be made to the
earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 13 A.
Using an Extension Cable
If an extension cable is required, use an approved 3–core
extension cable suitable for the power input of this tool (see
Technical Data).The minimum conductor size is 1.5 mm
maximum length is 30 m.
When using a cable reel, always unwind the cable completely.
Package Contents
D26200
The package contains:
1 Router with fixed base
1 Fixed base dust collection
1 Basic parallel fence (D262003)
1 Collet 8 mm (GB: 1/4")
1 Wrench
1 Instruction manual
D26203
The package contains:
1 Router with plunge base
1 Plunge base dust collection
1 Parallel fence with guide rods
1 Collet 8 mm (GB: 1/4")
1 Wrench
1 Guide bush 17 mm
1 Centering cone
1 Instruction manual
D26204
The package contains:
1 Router with plunge base
1 Fixed base
1 Dust collection fixed base
1 Dust collection plunge base
1 Parallel fence with guide rods
1 Basic parallel fence (D262003)
1 Collet 8 mm (GB: 1/4")
1 Wrench
1 Guide bush 17 mm
1 Centering cone
1 Kitbox
1 Instruction manual
1 Instruction manual
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
; the
2
Wear ear protection.
Wear eye protection.
Date Code Position (Fig. A)
The date code 25
is printed into the housing.
Example:
Description (Fig. A–K)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
Quick release tabs
1
Depth adjustment ring
2
Variable speed dial
3
On/Off (I/O) switch
4
Spindle lock button
5
LED lights
6
Guide pin groove
7
Micro adjustment scale
8
Locking lever
9
Parallel fence slot (fixed base)
10
, which also includes the year of manufacture,
2020 XX XX
Year of Manufacture
EnGLIsH
31