Download Print this page
Sealey HT107LED.V2 Instructions For Use

Sealey HT107LED.V2 Instructions For Use

Head torch 5w cree xpg led with adjustable focus & brightness 3 x aa cell

Advertisement

Quick Links

thank you for purchasing a sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
refer to
instructions
1. safety
1.1.
general
do not shine directly into your, another person's or an animal's eyes.
8
do not allow children to use the torch.
8
do not use the torch if you suspect that the battery or the torch casing is damaged.
8
do not leave batteries in a discharged state. Before storage remove batteries.
8
1.2.
battery safety
warning! To reduce the risk of burns or fire:
do not attempt to open the batteries.
8
do not crush, puncture, short contacts or dispose of in fire or water.
8
do not expose to temperatures above 60°c (140°).
8
replace only with the batteries designed for this product.
9
recycle or dispose of used batteries as stipulated by local regulation.
9
if the electrolyte in the batteries gets on your skin, thoroughly wash with soap and water. if it gets in your eyes, rinse thoroughly with
9
cool water and seek immediate medical attention.
2. introduction
Hands free 5W cree XPG spotlight with adjustable inclination to a direct light as required. dimmer switch allows brightness to be adjusted
from 20% to 100%. illumination type can be changed from spotlight to wide angle beam. main light and rear red warning light can be switched
between on, off and flash function. Adjustable headband and foam brow for added comfort.
3. specification
Model no: ....................................................... ht107led.V2
led Qty: ....................................................... 5W cree XPG
lumen output: .............................................................. 300lm
Battery: ................................................. 3 x AA (not included)
Weight: ........................................................................... 240g
fig.1
© Jack sealey limited
instructions for
head torch 5w cree xpg led with adjustable
focus & brightness 3 x aa cell
ht107led.V2
model no:
Original Language Version
Ht107led.V2 | issue 1 13/02/18

Advertisement

loading

Summary of Contents for Sealey HT107LED.V2

  • Page 1 Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
  • Page 2 4.1 Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products containing batteries (as defined within these regulations), that they are registered with Valpak’s registered compliance scheme. Jack sealey ltd Batteries Producer registration number (BPrn) is BPrn00705.