ABB civile Elos Series User Instructions page 32

USER INSTRUCTIONS
S E T T I N G PA R A M E T E R S
Setting the minutes
When the minutes figures blink, set the minutes using
the keys.
Press the MODE key within 30 seconds to confirm the
values set.
Setting the temperature unit of measurement
When the °C or °F starts to blink, select the unit of mea-
surement using the keys.
Press the MODE key within 30 seconds to confirm the
values set.
Setting set point T1
The temperature value starts to blink when the sym-
bol appears.
Adjust the value of T1 using the keys.
Press the MODE key within 30 seconds to confirm the
value set.
32