Table of Contents
Advertisement
In order to secure good communications
In order to secure good communications, observe the following points.
•
Communicate with another Bluetooth
maximum. The maximum communications distance may be reduced by the ambient
environment (walls, furniture, etc.) or the building structure.
In particular, in ferro-concrete buildings, communications may be impossible between rooms
that are separated by walls or floors with steel in them.
•
Communicate at least 2 meters from other equipment (electrical equipment/AV equipment/
office computer equipment/digital cordless telephones/faxes etc.). (In particular, microwave
ovens easily affect Bluetooth
you come too close to other equipment while its power is on, this device may stop
communicating normally or cause noise in or interfere with radio or television reception. (On
certain UHF and satellite broadcast channels, the television picture may be disrupted.)
•
When a broadcast station, transmitter, or the like is nearby and normal communications are
not possible, move to a different location. If the signal field in the area is too strong, normal
communications may be impossible.
•
Interference with wireless LANs
Since Bluetooth
TM
you use this device near equipment that has wireless LAN, signal interference will occur and
communications may drop and connections be lost. In such a case, take the following
countermeasures.
– Use this device at least 10 meters from the wireless LAN equipment.
– When using this device within 10 meters of wireless LAN equipment, switch off the power
for either this device or the wireless LAN equipment.
Bluetooth
Pocket Plugfree
Pocket Plugfree is a program for connecting through Bluetooth
It has an easy-to-understand interface that is consistent with the Pocket PC 2002
operations system.
Critical Point
For details on Pocket Plugfree, see the help file.
List of Services
Pocket Plugfree provides the following services.
Critical Point
Meaning of "Access" and "Sharing"
The functions "access" and "sharing" appear in the services in the table below. The difference
between these two is as follows.
– Access: Function for connecting to other Bluetooth device (client)
– Sharing: Function for connecting from other Bluetooth device (server)
TM
device within a straight-line distance of 50 meters
TM
communications, so be at least 3 meters away from them.) If
equipment and wireless LANs use the same frequency band (2.4 GHz), if
TM
Connection Using Pocket Plugfree
TM
.
137
Advertisement
Table of Contents
