Checking The Remaining Capacity Of The Battery - Fujitsu LOOX600 User Manual

As in the figure, (1) Connect the AC adapter to this device or DC-IN connector, (2)
Connect the power cable to the AC adapter, (3) Plug in the power cord to the socket.
Power cable
Points to Watch Out
• During charging, the indicator flashes green.
• Charging takes about three hours. When charging is complete, the indicator lights up green.
• If the expansion battery is installed, it is charged in parallel with the main internal battery.

Checking the Remaining Capacity of the Battery

After you switch on the power for this device, you can check the remaining capacity of
the battery with the following procedure.
→ "System" tab → "Power Management" in that order.
1 Tap
You can check the remaining capacity at "Remaining Capacity".
AC adapter
(3)
(2)
(1)
DC-IN connector
11