Table of Contents
Advertisement
Quick Links
* The figure above shows a combination of this product and the separately sold ET-PKV100S ceiling mount bracket (for low
ceilings).
* Unless specified otherwise, figures in these instructions show a combination with the ceiling mount bracket (for low ceilings).
The installation method is also the same as that of the ceiling mount bracket (for high ceilings).
Thank you for purchasing this Panasonic product.
■ To customers
The "Installation Instructions" is intended for use by installation personnel. Be sure to employ certified personnel to perform
the installation.
After installation, have the installation personnel return these "Installation Instructions" to you, and save it for future use.
When moving or removing the projector, give this manual to the certified personnel and have them perform the procedure.
■ To installation personnel
Read the "Installation Instructions" thoroughly and then perform the operation correctly and safely.
Be sure to read through the section entitled "Read this first!" (page 3) before proceeding with the installation.
After installation, return these "Installation Instructions" to the customer.
Installation Instructions
Projector Mount Bracket
ET-PKL300B
Model No.
TQZJ545-2
Advertisement
Table of Contents
Related Manuals for Panasonic ET-PKL300B
Summary of Contents for Panasonic ET-PKL300B
- Page 1 * The figure above shows a combination of this product and the separately sold ET-PKV100S ceiling mount bracket (for low ceilings). * Unless specified otherwise, figures in these instructions show a combination with the ceiling mount bracket (for low ceilings). The installation method is also the same as that of the ceiling mount bracket (for high ceilings). Thank you for purchasing this Panasonic product. ■ To customers The “Installation Instructions” is intended for use by installation personnel. Be sure to employ certified personnel to perform the installation. After installation, have the installation personnel return these “Installation Instructions” to you, and save it for future use.
-
Page 2: Table Of Contents
Contents Read this first! ....................3 Product description ................... 4 Standard installation dimensions ..............5 Throw distance ........................8 Installation ......................14 Setting up the screen ......................14 Screws tightening torques ....................14 Installing the bracket to the projector ................14 Installing the projector to the ceiling mount bracket ............16 Attaching the projector drop prevention kit ............... -
Page 3: Read This First
Electric shocks may result from contact with any metal objects inside the ceiling. ■ Panasonic disclaims all liability for any accidents or any damage caused by the installation of the ceiling mount bracket using methods that are not described in these Installation Instructions or methods that do not use the parts specified in these Instructions. -
Page 4: Product Description
Product description This is a ceiling mount bracket for installing projectors. ■ Applicable ceiling mount brackets Ceiling mount bracket (for low ceilings): ET-PKV100S Ceiling mount bracket (for high ceilings): ET-PKV100H ■ Structural components Parts name Form (number of parts) Applications Projector mount This is used to install the projector bracket itself. × 1 This prevents a screw that Safety fixture secures the projector to the... -
Page 5: Standard Installation Dimensions
Standard installation dimensions The dimensional relationship between the screen and the projector is shown below. Establish the dimensions after assessing the area possible for installation. The projection distance can be adjusted with the lens zoom function (excludes PT-TW330/PT-TW240/PT-TX300). Adjust the projection distance while checking the projection screen. <When using the PT-LW321/PT-LW271/PT-LX351/PT-LX321/PT-LX271/PT-TW330/PT-TW240/PT-TX300> When using the ceiling mount bracket Ceiling (for low ceilings) Projected image L (LW/LT) (4-1/32") Screen 44 (1-23/32") (3-15/32") <Units: mm (")> When using the ceiling mount bracket Ceiling (for high ceilings) Projected image 102(4") L (LW/LT) Screen... - Page 6 Standard installation dimensions (continued) <When using the PT-TW331R / PT-TX301R > When using the ceiling mount bracket Ceiling (for low ceilings) Projected image L (LW/LT) (4") Screen 44 (1-3/4") (3-15/32") <Units: mm (")> When using the ceiling mount bracket Ceiling (for high ceilings) Projected image (4") L (LW/LT) Screen...
- Page 7 Standard installation dimensions (continued) <When using the PT-LX300/PT-LX270> When using the ceiling mount bracket Ceiling (for low ceilings) Projected image (4-19/32") L (LW/LT) Screen 44 (1-23/32") (3-15/32") <Units: mm (")> When using the ceiling mount bracket Ceiling (for high ceilings) Projected image L (LW/LT) (4-19/32") Screen (3-15/16")
-
Page 8: Throw Distance
Standard installation dimensions (continued) Throw distance Projected image Screen L (LW/LT) L (LW/LT) * Projection distance (m) Height of the projection area (m) Width of the projection area (m) Distance from the center of lens to L (LW/LT) the image lower end (m) Screen Diagonal length of the projection area (m) *1: L W: Minimum distance, LT: Maximum distance 8 - ENGLISH... - Page 9 Standard installation dimensions (continued) Projection distance for PT-LW321 and PT-LW271 All measurements below are approximate and may differ slightly from the actual measurements. (unit: m (")) Projection size For 4:3 aspect ratio For 16:9 aspect ratio For 16:10 aspect ratio Minimum Minimum Minimum Screen Maximum Height Maximum Height Maximum Height diagonal distance distance position distance distance position distance...
- Page 10 Standard installation dimensions (continued) Projection distance for PT-LX351, PT-LX321 and PT-LX271 All measurements below are approximate and may differ slightly from the actual measurements. (unit: m (")) Projection size For 4:3 aspect ratio For 16:9 aspect ratio Maximum Minimum Maximum Minimum Screen diagonal Height Height distance distance distance distance (SD) position (H) position (H) (LW) (LT) (LW) (LT)
- Page 11 Standard installation dimensions (continued) Projected image Screen Projection distance (m) Height of the projection area (m) Width of the projection area (m) Distance from the center of lens to the image lower end (m) Screen Diagonal length of the projection area (m) Projection distance for PT-TW330 , PT-TW240 and PT-TW331R All measurements below are approximate and may differ slightly from the actual measurements.(unit: m (")) Projection size For 4:3 aspect ratio For 16:9 aspect ratio For 16:10 aspect ratio Screen Projection Height position Projection Height position...
- Page 12 Standard installation dimensions (continued) Projection distance for PT-TX300 and PT-TX301R All measurements below are approximate and may differ slightly from the actual measurements. (unit: m (")) Projection size For 4:3 aspect ratio For 16:9 aspect ratio Screen diagonal (SD) Projection distance (L) Height position (H) Projection distance (L) Height position (H) 1.02 (40") 0.51 (1'8") 0.09 (4") 1.27 (50") 0.64 (2'1") 0.11 (4") 0.69 (2'3")
- Page 13 Standard installation dimensions (continued) Projected image Screen L (LW/LT) L (LW/LT) * Projection distance (m) Height of the projection area (m) Width of the projection area (m) Distance from the center of lens to L (LW/LT) the image lower end (m) Screen Diagonal length of the projection area (m) *1: L W: Minimum distance, LT: Maximum distance Projection distance for PT-LX300/PT-LX270 All measurements below are approximate and may differ slightly from the actual measurements. (unit: m (")) Projection size For 4:3 aspect ratio For 16:9 aspect ratio Minimum Maximum Minimum Maximum Screen diagonal Height Height...
-
Page 14: Installation
Installation After checking the height, width, and structure of the installation location while referring to “Standard installation dimensions” on pages 5 to 13, determine the appropriate positions for setting up the screen and installing the projector. Setting up the screen Set up the screen according to the specified method in a position which takes into account the projection distance and angle and the type of screen being used. Screws tightening torques M3 ..0.8±0.1 N•m M4 ..1.25±0.2 N•m M8 .. - Page 15 Installation (continued) <When using the PT-TW331R / PT-TX301R > 1) Place the projector upside-down onto a piece of soft material. Remove three screws 2) Unscrew and remove the three captive washer screws that are securing the bracket. 3) Secure the projector mount bracket to the Projector mount bracket bracket surface at the bottom of the projector using the three captive washer screws that you Secure in three places removed, as illustrated on the left. (Do not use the three supplied captive washer screws (M3 × 8, silver).) 4) Secure the safety fixture to the projector mount Screw, captive washer bracket using a supplied captive washer screw (black, M3×6) Safety fixture...
-
Page 16: Installing The Projector To The Ceiling Mount Bracket
Installation (continued) Installing the projector to the ceiling mount bracket Suspend the projector from the optional ceiling mount bracket (for low ceilings/for high ceilings) installed to the ceiling. Ceiling mount bracket (for low ceilings): ET-PKV100S Ceiling mount bracket (for high ceilings): ET-PKV100H 1) Install the projector mount bracket to which the projector body is attached to the ceiling mount bracket (optional) fixed to the ceiling by sliding as in the figure below. Ceiling mount bracket Note (optional) z The direction for attaching the projector mount bracket and ceiling mount bracket is not specified. Projector mount bracket Attention z Before installing the projector to the ceiling mount bracket, check if the angle adjusting screw of the... -
Page 17: Attaching The Projector Drop Prevention Kit
Installation (continued) Attaching the projector drop prevention kit Attach the wire rope to the projector (sold separately). ■ When Using the PT-LW321 / PT-LW271 / PT-LX351 / PT-LX321 / PT-LX271 / PT-TW330 / PT-TW240 / PT-TX300/ PT-TW331R / PT-TX301R 1) Pull the end of the wire rope for the projector several times around the pole as illustrated below. z Reduce the slack as much as possible. 2) Secure the bracket at the front end of the wire rope for the projector to “a”... -
Page 18: Installing The Ceiling Mount Bracket Drop Prevention Kit To The Ceiling
Installation (continued) ■ Angle adjustment range When this ceiling mount bracket is used, the projector can be tilted up to 15° forward, backward, left, and right, but the maximum tilt angle differs depending on the projector. Follow the instructions of the projector and make sure you do not exceed the maximum tilt angle. Rotates 360° left or right 15° 15° 15° Installing the ceiling mount bracket drop prevention kit to the ceiling Attach the wire rope to the ceiling mount bracket and perform the installation work. <Attaching the wire rope for ceiling mount bracket> When using the ceiling mount When using the ceiling mount bracket (for low ceilings) bracket (for high ceilings) - Page 19 Installation (continued) <Installation procedure> Max. 1000 mm (3'3") Max. 1000 mm(3'3") This procedure uses the example of attachment to aconcrete surface. 1) Mount the anchoring nuts or curled plugs (M8) in the stable ceiling surface (position illustrated on the left). Anchoring nuts or z When the installation location is a wooden curled plugs structure, drill holes in a ceiling beam and then (M8) attach commercially available hanger bolts. Attention z When mounting the anchoring nuts or curled plugs (M8) to the ceiling, be careful that there is no slack...
-
Page 20: Specifications
Specifications Width: 126 mm (4-31/32"), External dimensions Height: 40 mm (1-9/16"), Depth: 108 mm (4-1/4") Weight Approx. 0.3 (0.66 lbs.) https://panasonic.net/cns/projector/ SS0813AM2047 -PS Printed in Japan...