Table of Contents
Advertisement
Quick Links
Thank you for purchasing this Panasonic product.
■ To customers
The "Installation Instructions" is intended for use by installation personnel. Be sure to employ certified personnel to perform
the installation.
After installation, have the installation personnel return these "Installation Instructions" to you, and save it for future use.
When moving or removing the projector, give this manual to the certified personnel and have them perform the procedure.
■ To installation personnel
Read the "Installation Instructions" thoroughly and then perform the operation correctly and safely.
Be sure to read through the section entitled "Read this first!" (page 3) before proceeding with the installation.
After installation, return these "Installation Instructions" to the customer.
Installation Instructions
Ceiling Mount Bracket (for portrait)
ET - PKR100P
Model No.
TQZJ495-2
Advertisement
Table of Contents
Related Manuals for Panasonic ET-PKR100P
Summary of Contents for Panasonic ET-PKR100P
- Page 1 Ceiling Mount Bracket (for portrait) ET - PKR100P Model No. Thank you for purchasing this Panasonic product. ■ To customers The “Installation Instructions” is intended for use by installation personnel. Be sure to employ certified personnel to perform the installation.
-
Page 2: Table Of Contents
Contents Read this first! ....................3 Product description ................... 4 Standard installation dimensions ..............6 Installation ......................9 Setting up the screen ......................9 Screws tightening torques ....................9 Preparing the attachment plate ..................9 Installing the attachment plate to the ceiling ..............11 Installing the bracket to the projector ................ -
Page 3: Read This First
Electric shocks may result from contact with any metal objects inside the ceiling. ■ Panasonic disclaims all liability for any accidents or any damage caused by the installation of the ceiling mount bracket using methods that are not described in these Installation Instructions or methods that do not use the parts specified in these Instructions. -
Page 4: Product Description
Product description This is a ceiling mount bracket for installing projectors. ■ Structural components Parts name Form (number of parts) Applications The attachment plate is attached to the ceiling via four ceiling mount bolts. Attachment plate Installation methods are different for concrete and wooden ceilings. - Page 5 Product description (continued) Parts name Form (number of parts) Applications Wire rope for the Screw, captive Projector drop Prevents the projector from projector washer (M4×10) × 1 prevention kit falling. (2.0 mm (3/32") wire diameter, 600 mm (23-5/8") length) × 1 ■...
-
Page 6: Standard Installation Dimensions
Standard installation dimensions The dimensional relationship between the screen and the projector is shown below. Establish the dimensions after assessing the area possible for installation. If your projector has a zoom lens, you can use it to adjust the projected image size and the projection distance. Check the projected image while making fine adjustments. - Page 7 Standard installation dimensions (continued) ■ Projected image size and projection distance The dimensions in the table below contain a slight error. z Distances for the PT-RZ475 series Projected image size (9:16 aspect ratio) Center of lens- Center of lens- Projection distance (L) Top edge of image: H Right edge of image: W Screen diagonal (SD)
- Page 8 Standard installation dimensions (continued) z Distances for the PT-RW430 series Projected image size (10:16 aspect ratio) Projection distance (L) Center of lens- Center of lens- Top edge of image: H Right edge of image: W Screen diagonal (SD) Height (SH) Width (SW) Minimum (LW) Maximum (LT)
-
Page 9: Installation
Installation After checking the height, width, and structure of the installation location while referring to “Standard installation dimensions” on pages 6 to 8, determine the appropriate positions for setting up the screen and installing the projector. Setting up the screen Set up the screen according to the specified method in a position which takes into account the projection distance and angle and the type of screen being used. - Page 10 Installation (continued) ■ Attaching the pole base to the adjustment pole 2 1) Place a pole base over the adjustment pole 2 as Adjustment pole 2 shown on the left and align the “FRONT” inscription with the arrow. (M6 × 16) 2) Insert 2 supplied captive washer hex head bolts ×...
-
Page 11: Installing The Attachment Plate To The Ceiling
Installation (continued) Installing the attachment plate to the ceiling After checking the height, width, and structure of the installation location while referring to “Standard installation dimensions” on pages 6 to 8, determine the appropriate positions for setting up the screen and installing the projector. - Page 12 Installation (continued) ■ Installing the attachment plate Depending on whether it is installed on a concrete or wooden ceiling structure, there are two different installation methods. Carry out by the appropriate installation method which is suited to each ceiling. Attention z Make sure to use the ceiling mount bolts, hex nuts, flat washers, spring washers, anchoring nuts or curled plugs for M10.
- Page 13 Installation (continued) Installing to a concrete structure 1) Attach the anchoring nuts or curled plugs to a concrete ceiling and securely fix the four ceiling mount bolts. (Refer to page 11 for attachment Anchoring nut or curled positions.) plug z When installing anchoring nuts or curled plugs, strictly adhere to the installation instructions Concrete ceiling supplied by the manufacturer of the nuts so that...
-
Page 14: Installing The Bracket To The Projector
Installation (continued) Installing the bracket to the projector Attach the projector mount bracket to the projector (sold separately). *PT-RZ470 is used as an example in the illustrations throughout this manual. Projector mount bracket 1) Place the projector upside-down onto a piece of soft material. - Page 15 Installation (continued) 2) Insert the temporarily fastened captive washer hex Hook head bolts on either side into the hook section of the projector mount bracket. Attention z Hold the projector firmly until the captive washer hex head bolts are securely in place in the hook part of the projector mount bracket.
-
Page 16: Attaching The Projector Drop Prevention Kit
Installation (continued) Attaching the projector drop prevention kit Attach the drop prevention wire rope for the projector. 1) Turn the wire rope for the projector around the adjustment pole. z Minimize the slack of the wire rope. Put through a loop. 2) Secure the bracket at the front end of the wire rope for the projector to “a”... -
Page 17: Installing The Ceiling Mount Bracket Drop Prevention Kit
Installation (continued) Installing the ceiling mount bracket drop prevention kit Attach the wire rope for the ceiling mount bracket to the ceiling mount bracket before performing installation work to prevent falling. <Attaching the wire rope for the ceiling mount bracket> Wire rope for the ceiling mount bracket As illustrated on the left, pass one end of the wire... -
Page 18: Adjusting The Installation Angle
Adjusting the installation angle The ceiling mount bracket has functions to adjust the horizontal swing and the horizontal and vertical tilt. z After confirming that the projector lens is on the standard position , adjustments should be carried out in order to make the center of the projector lens perpendicularly to the surface of the projection screen. -
Page 19: Specifications
Adjusting the installation angle (continued) ■ If the picture is tilted to the left or right z Adjust to the position where the picture is not tilted by loosening the captive washer hex bolts fixing the projector mounting bracket and the angle adjusting bracket (two locations in front and rear), and rotating the projector. - Page 20 MEMO 20 - ENGLISH...
- Page 21 MEMO ENGLISH - 21...
- Page 22 SS0113KM2047 -KI Printed in Japan...