Device Data 500Fsd20; General Data - ABB HITACHI EDS500 Series Manual

Device description
Connectors
X1
X2
X3
X4
X5
EXT
4.3.3

Device data 500FSD20

The interface data can be found in Chapter 4.5, "Connections".

General Data

Type of modulation
Type of communication
Operation modes
Channel assignment
Mechanical layout
Dimensions
Housing type
Mounting
Cooling
Enclosure protection class
Weight
Power supply input (X1)
Operating voltage
Power consumption (typical)
Current demand (peak)
Ordering information
500FSD20 R0001
4.4 General data
General standards
Safety tested according to
Environmental conditions tested according to • ETSI EN 300 019-1-3 class 3.4
1KGT151042 V000 1
Type
"Power connector (X1)", page 23
"Serial interface to DTE (X2)", page 24
"Interface to transmission line (X3)",
page 25
"Alarm relay (X4)", page 26
"Serial interface for configuration (Con0)",
page 27
"Extension interface (EXT)", page 27
Frequency shift keying (FSK) with carrier
switch-off for multi-drop network
Point-to-point or multi-drop network
Full- or half-duplex via two-/ four-wire links
• according to CCITT raster (R.35, R.37,
R.38A, V.23/1200 baud)
• additional options: 600 baud or 2400 baud
channel
99 x 45 x 115 mm (H x W x D)
Plastic housing
DIN rail mounting (EN 50022 TS35: 35 mm x 15
mm or 35 mm x 7.5 mm)
thermal convection (no moving parts)
IP20
230 g
24...60 V DC -15%...+20%
3 W
180 mA
1KGT039200R0001
• IEC 62368-1
• IEC 60255-21-1 class 1
Compact device 500FSD20
21