Bottom Carrier Removal - Lenovo Motorola One Zoom Service And Repair Manual

Lenovo Motorola One Zoom
Level 2 – Service and Repair Manual

Bottom Carrier Removal

NOTE
The Bottom Carrier can be recovered
and reused after removal.
1. Use the Torque Driver with Torx Bit T3 to
remove the seven screws as shown.
/// WARNING ///
The screws cannot be reused after removal.
2.
3. Use the Plastic Tweezer to remove the Copper
Foil From the location as shown.
4. Use the Plastic Tweezer to remove the Copper
Foil and Conductive Foam from the location as
shown.
5. Use the flat end of the Black Stick to lift the
Bottom Carrier as shown.
PAGE 36
Lenovo Confidential Restricted:
Do not share without consent from Lenovo