Operating Remote Learning; Sound Bar Placement - Toshiba SB3950E1 User Manual

SB3950E1 40W Soundbar Speaker System

Operating Remote Learning

This Soundbar includes a remote learning feature for most AV product's remote controls.
Please note, not all AV product remote controls are able to learn remotely.
Steps to learn [VOL +] key
1. Power On the sound bar
2. Press and hold [VOL - ] and [SURROUND]
keys for 2 seconds. 'Learn' will then be
shown on the display to indicate that you are
entering learning mode.
3. Press [VOL +] key to learn [VOL +] key,
then the display will show 'VOL UP' text
4. Tap the [VOL +] on AV remote key 4-8 times,
once per second. Tap, do not hold. 'Learning'
will be shown on the display when each AV
remote key is tapped.
5. When the command has been learnt, 'Learnt'
will be shown on the display.
6. Press and hold [VOL - ] and [SURROUND] keys for 2 secs to exit learning mode.
'Learn Exit' will be shown on the display for 3 seconds and then the system will revert
back to the input source display.
Repeat steps 3-5 to learn other keys: [POWER], [INPUT], [VOL -] and [SURRROUND]
Fail to learn
If the bar has failed to learn certain IR remote codes, 'Learn Fail' will be shown on the
display for 3 seconds and then the system will revert back to the Learn key display.
Steps to erase all learnt remote codes
1. Put the sound bar in Standby mode.
2. Press and hold [VOL - ] and [ SURROUND ] keys for 5 secs, then 'RC ERASED'
will be shown for 3 seconds on the display.

Sound Bar Placement

We recommended placing your sound bar directly below the TV.
Wall-mounting your sound system
We recommend using drywall anchors that support a minimum
of 2.5 kg with these brackets. Mount the 2 Mounting Brackets
where you marked the six screw holes for the anchor locations.
Six screw
positions
you marked
EN-6
(Screws not
supplied)
Mute
9
DTS
10
(Sample Illustration)
Sound Bar Placement
User's Manual
Power
11 On/Off
Optical
12
Line-in
13
Volume
Increase
14
Volume
15
Decrease