Configuring The Device; Resetting The Device - Siemens SIMATIC NET Installation Manual

Device Management
3.2 Configuring the Device
3.2

Configuring the Device

Once the device is installed and connected to the network, it must be configured.
All configuration management is done via the RUGGEDCOM ROS interface. For more
information about configuring the device, refer to the RUGGEDCOM RUGGEDCOM
RS8000T Configuration Manual associated with the installed software release.
3.3

Resetting the Device

The RUGGEDCOM RS8000T can be reset (rebooted) using the RESET button. The
RESET button is recessed and can only be reached using a pin or small screwdriver.
To reset the device, quickly press and release the RESET button with a pin.
18
RUGGEDCOM RS8000T
Installation Manual, 01/2021, C79000-G8976-1023-05