Definitions: Safety Guidelines; Safety Instructions - DeWalt D21585 Original Instructions Manual

english

Definitions: Safety Guidelines

The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not avoided,
may result in minor or moderate
injury.
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.
EC-Declaration of Conformity
MACHINERY DIRECTIVE
DIAMOND DRILLING MACHINE
D21585
D WALT declares that these products described
e
under Technical Data are in compliance with:
2006/42/EC, EN61029-1:2009 +A11:2010
These products also comply with Directive 2014/30/
EU and 2011/65/EU. For more information, please
contact D WALT at the following address or refer to
e
the back of the manual.
The undersigned is responsible for compilation of
the technical file and makes this declaration on
behalf of D WALT.
e
Markus Rompel
Director Engineering
D WALT, Richard-Klinger-Straße 11,
e
D-65510, Idstein, Germany
20.04.16
24
WARNING: To reduce the risk of injury,
read the instruction manual.

Safety Instructions

WARNING! When using electric tools
basic safety precautions should always
be followed to reduce the risk of fire,
electric shock and personal injury
including the following.
Read all these instructions before attempting to
operate this product and save these instructions.
SAVE THIS MANUAL FOR FUTURE REFERENCE
General Safety Rules
1. Keep work area clear.
Cluttered areas and benches invite injuries.
2. Consider work area environment.
Do not expose the tool to rain. Do not use the
tool in damp or wet conditions. Keep the work
area well lit. Do not use the tool in the presence
of flammable liquids and gases.
3. Guard against electric shock.
Avoid body contact with earthed or grounded
surfaces (e.g., pipes, radiators, ranges and
refrigerators).
4. Keep other persons away.
Do not let persons, especially children, not
involved in the work, touch the tool or the
extension cord and keep them away from the
work area.
5. Store idle tools.
When not in use, tools must be stored in a dry
place and locked up securely, out of reach of
children.
6. Do not force the tool.
It will do the job better and safer at the rate for
which it was intended.
7. Use the right tool.
Do not force small tools to do the job of a heavy
duty tool. Do not use tools for purposes not
intended; for example do not use circular saws
to cut tree limbs or logs.
8. Dress properly.
Do not wear loose clothing or jewellery, as
these can be caught in moving parts. Non-
skid footwear is recommended when working
outdoors. Wear protective hair covering to
contain long hair.
9. Use protective equipment.
Always use safety glasses. Use a face or dust
mask if working operations create dust.