Package Contents; Assembling The Table Stand - Sharp AN-65ST1 Operation Manual

Package Contents

Stand/mounting bracket set (x1)
Base (x1)
Stand bracket (x1)
* The screw notation M6 means that the diameter of the screw thread is 6 mm.

Assembling the Table Stand

Preparations
• Before attaching the table stand, remove all cables from the LCD color TV.
1
Attach the stand/mounting bracket set
to the base. (You can use the packing
material to facilitate the process. Refer
to "Assembling the Table Stand by Using
the Packing Material" on page E-4.)
Stand cover (x1)
Stand cable cover (x1)
2
Hex screws A
(M6, 13 mm)
(x4)
Hex screws C
(M8, 20 mm)
(x4)
M6 hex wrench
(x1)
• Operation manual (this manual)
Fix the stand to the base using 4
included M6 hex screws (A).
(Use the included M6 hex wrench.)
Hex screws B
(M6, 8 mm)
(x2)
Hex screws D
(M8, 15 mm)
(x2)
M8 hex wrench
(x1)
E-2