Panasonic EY3654 Service Manual page 5

Ref. No. 1E
Ref. No. 1F
Procedure 1A → → → → 1B → → → → 1C → → → → 1D → → → → 1E
Procedure 1A → → → → 1B → → → → 1C → → → → 1D → → → → 1E → → → →
1F
Removal of micro switch.
1.Remove one screw on switch frame.
2.Remove micro switches from driving holder.
(Assembly of micro switch)
There are two connecting methods for micro
switch.
The micro switches themselves are all same.
For connection A, confirm position or
deformationof switch lever.
For connection B, take switch lever off.
Removal of rack.
1.Take out spring pin using ø3mm stick.
NOTE :
When taking pinion gear out, rack may move
freely.
2.Pull out rack forward.
<CHECK POINT>
When rack does not move pushing release lever,
there is a possibility to cause that the part of
pinion breaks off or deformation of stick.
5
EY3654