Table of Contents
Advertisement
network connection, and that the supporting hub is
functioning properly.
1. Ascertain that the adapter card is fully and
firmly seated in the slot connector.
2. Check the length and rating of connecting
cables.
3. Ascertain that the adapter's PCI slot is not
deactivated at the BIOS level. The CMOS
Setup utility in PCI computers ordinarily
provides the option to a ctivate or deactivate
PCI slots.
4. Replace the adapter in question with a verified
adapter and run DIAG.EXE diagnostic tests
on the sofrware diskette at directory of
\DIAG\.
5. Install the questioned adapter in another PCI
computer and run the tests again.
Remove all other PCI adapters from the computer
and
run
verification/diagnostic run is not normal, then
there is probably an interrupt number conflict
which will have to be resolved manually by a
CMOS Setup utility run after you have reinstalled
all of the expansion cards.
the
tests
7
again.
If
the
Advertisement
Table of Contents
