Care And Cleaning; Air Filters; Drain - GE Zoneline AZ95H09 Owner's Manual And Installation Instructions

Care and Cleaning

Turn off the Zoneline and disconnect the power supply before cleaning.

Air Filters

NOTICE: Do not operate the Zoneline without the
filter in place. If a filter becomes torn or damaged, it
should be replaced immediately.
Operating without the filter in place or with a damaged
filter will allow dirt and dust to reach the indoor coil and
reduce the cooling/heating, performance, airflow, and
efficiency of the unit.
Dirty filters reduce cooling, heating performance and air
flow.
Changing the filter will: Decrease cost of operation,
reduce the risk of premature component failure.
Replacement filters should be purchased from your local
retailer where air conditioner and furnace accessories
are sold.
NOTE: Use only one filter in the installation.
To replace the filter (unit mounted return air filter):
2. Remove the filter.
To maintain optimum performance, change the filter
at least every 30 days.

Drain

Clean the drain system regularly to prevent clogging.
8
To remove
and replace
the filter:
Filter
Return air grille
Remove Filter
Unit-mounted filter
Filter
Access-panel with
return air grille
49-5000561 Rev. 1