Table of Contents
Advertisement
5. Starting a program
Starting a program
The program can be started when the
Start/Stop sensor button is flashing on
and off.
Touch the Start/Stop sensor button.
The Start/Stop sensor button lights up
constantly.
Status
Time left
Normal
Drying
and the program duration remain-
ing will light up in the display.
The laundry will be cooled down shortly
before the end of the program.
Tip: In the pull-down menu, you can
view the selected drying level or dura-
tion and the energy consumption.
With programs with a selectable drying
level,
calculates the residual
PerfectDry
moisture present in the laundry to en-
sure precise drying results. However, if
you load the dryer with little or dry laun-
dry, it will be dried/aired for a set dura-
tion.
The
PerfectDry
display will only light up
with programs with selectable drying
levels:
- hollow point after a program has
started
The drying level reached will still be
shown later on.
30
11:02
1:42
h
Machine Iron
PerfectDry
Add laundry
- solid point when the drying level is
reached
The time left for the drying level pro-
grams can vary or "jump". It depends
on the load quantity, type of laundry,
residual moisture in the laundry, or wa-
ter hardness.
PerfectDry
adapts, constantly increasing the accu-
racy of the time left.
Avoid overdrying items of laun-
dry and garments.
Otherwise they can wear out!
Energy savings
After 10 minutes, the indicators dim and
the Start/Stop sensor button starts
flashing.
Touch the Start/Stop sensor button to
switch the indicators on again (this
does not have any effect on a running
program).
The drum lighting switches off once the
program has started.
Adding laundry
You can add laundry after the program
has started.
Follow the description in "Changing
the program sequence – Adding or
removing laundry".
continually
Advertisement
Table of Contents
