Table of Contents
Advertisement
SmartStart
The SmartStart function lets you de-
fine a time period during which your
dryer will start automatically. The start
takes place via a signal, e.g., from
your energy supplier, that indicates
that the electricity rate is particularly
economical.
This function is active when the
SmartGrid setting is switched on.
The time period can be defined be-
tween 1 minute and 24 hours. During
this period, the dryer waits for the sig-
nal from the energy supplier. If no signal
is sent during the defined period, the
dryer starts the drying program.
Setting the time period
If you have activated the SmartGrid
function in Settings, SmartStart or
SmartFinish will appear in the display
instead of Start at or Finish at when
you touch the Timer sensor button
(see "Settings – SmartGrid").
The procedure for setting this is the
same as for setting the time for delay
start.
Now set the time you want and con-
firm with the
OK
Touch the Start/Stop sensor button to
start the drying program with Smart-
Start.
The selected program will start auto-
matically, as soon as the energy sup-
plier has sent the signal, or the latest
calculated start time has been reached.
The procedure for changing or delet-
ing the SmartStart function is the
same as described for the delay-start
function.
Timer
sensor button.
43
Advertisement
Table of Contents
