Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Siemens SUT50
Summary of Contents for Siemens SUT50
- Page 1 HMI device SUT50 User Manual UM_SUT50_EN.doc...
-
Page 2: Table Of Contents
7.3.2 Locking the HMI device ................20 7.3.3 Digital-joystick emulation ................. 21 7.3.4 Adjust brightness and contrast of the SUT50 display ......21 Parameterisation of the videomatrix ........... 21 Maintenance ..................22 Cleaning ....................22 Transport and storage ................22 Appendix .................... -
Page 3: General Information
General information General information Safety Prior installation, maintaining, transporting, or storing this product, read the – safety advices for this product, as well as the entire manual Pay attention to the warnings in the following chapters – Keep this document for later use or when passing the device to someone else –... -
Page 4: Authorized Persons
Safety Authorized persons Danger of life for persons without insufficient qualification Only skilled personnel are allowed to work on the device! Disregarding this can cause death, serious injury, or consider- Warning able property damage. This document does exclusively address the following target groups: installer –... -
Page 5: Electromagnetic Compatibility (Emc)
Safety Electrostatic Discharge Electrostatic discharge can damage or destroy components Do not touch parts at risk (e.g. contacts of plugs) Before touching a device, discharge your body electrostatically (e.g. by touching a grounded metallic object) Electromagnetic compatibility (EMC) This product is desgined for use in general CCTV-applications at living, business or industrial enviroments. -
Page 6: Ordering Data
Former Order reference Product Weight Siemens No. (ca. kg) SUT50 HMI device SUT50 in a housing with 41 Buttons and Analog-Joystick for Videomatrix Accessories 9-911 2GF1800-8BE Power supply 0.53 for external supply of HMI devices, 230 V, 50 Hz/DC 12 V, 640 mA,... -
Page 7: Features
Features Features The HMI device is a keyboard with joystick and display for controlling videomatrix systems. It is compatible with the SIMATRIX series and VM1000. The analogue joystick allows control the movement speed of cameras relative to its angle via a videomatrix. The device is configurated with key input and joystick or optionally with a configura- tion software via LAN. -
Page 8: Setting-Up For Operation
Setting-up for operation Setting-up for operation Power supply The wall power supply is only provided for operation in TN networks (according – to VDE 0100, part 300 or EN 60950-1). For safe operation the device must be protected by an external overcurrent protection rated no more than 16 A. The supplied wall power supply can be connected to electrical supplies with –... -
Page 9: Interface Configuration
RS485 RS485-Termination: Next to the RS485 jumper block a single jumper for the RS485 termination is located. This jumper must be removed when multiple SUT50 in the configuration of RS485 are connected together to a common interface-cable. UM_SUT50_EN.doc Security Products... -
Page 10: Pin Mapping For Sub-D Connector
Setting-up for operation Pin mapping for Sub-D connector Fig. 2 9-pole Sub-D-Connector The mapping of the 9-pole Sub-D connector depends on the configured interface (see also Interface configuration) The following table shows the possible pin mapping: TTY * RS485 RS232 ** TTY-OUT+ TxD+ TTY-OUT–... -
Page 11: Pin Mapping Of Modular Connector
VM1000-CPU is cabable to provide power supply for all 16 connectable devices. Do not exceed maximum load of videomatrix by powering more SUT50 than described above! In all other cases the attached external wall power supply can be used, which is connected to the 9-pole Sub-D connector. -
Page 12: Mounting Advices
The HMI device SUT50 can be connected via TTY-interfaces „Term 1“ to „Term 8“ (depends on type and upgrading) as well as via RS232-Interfaces „COM2“ to „COM4“. In RS232 mode the HMI device SUT50 has to be supplied by a seperate power supply Fig. 5 Controlling a Siemens-Videomatrix UM_SUT50_EN.doc... -
Page 13: Ethernet Mode
PCs are connected as well. Please be aware of delays that may occur when the network traffic is charged with large amount of data. This affects both directions of communication of the SUT50 - sending and receiving data. 5.3.3 Network router A connection via network router is possible. -
Page 14: Joystick
Joystick Joystick The multifunctional Joystick control the cameras angles (swing, tilt) as well as fo- cus and zoom adjustment one handed. Focus and zoom are furthermore adjustable with buttons of the SUT50. Fig. 6 Joystick functions and control Position Action... -
Page 15: Configuration
Configuration of the SUT50 by PC via LAN using VmnetCfg2.exe – Possible configurations – While configuring the SUT50, communication to server and videomatrix is interrupted. Internal configuration menu The HMI device has a menu guided configuration. Use the Joystick to navigate through the configuration menu, which is shown on the display. -
Page 16: Overview Configuration Menu
Configuration 7.1.2 Overview configuration menu Menu items Options Explanation communicat. mode ethernet Operating the SUT50 in LAN (factory setting) serial master TTY, self-active mode serial slave TTY, polling mode Address of the device (factory setting) console number joystick mode proportional... -
Page 17: Device- And Ip Address Configuration
When the desired menu item is displayed, move the joystick right to select the – value you want to change. This value flashes. Use the numeral keys of the SUT50 to enter the desired value. (After entering a – number the next number begins to blink automatically and will be changed next). -
Page 18: Enable / Disable Pin
PC via LAN-Interface. Therefore the program VmnetCfg2.exe is required, which must be executed on a Windows®-PC. Configuration via LAN requires furthermore that the IPs of the PC and the SUT50 are in the same network segment. Since that is most often not the case it is adviseable to configure the IP address of the SUT50 with the implemented configu- ration menu first. -
Page 19: Instructions For Configuration With Vmnetcfg2.Exe
The automatic search can be repeated with the button „Scan for devices“. Is the SUT50 only accessable via a router (i.e. SUT50 is in another subnet than PC), a manual search is required. Push the button „Manual scan“ and enter the IP if the SUT50. -
Page 20: User Configuration
„Alt-F4“ or by clicking the red „X“ in the upper right corner. When a PIN for configuration is set in the SUT50, VMnetCfg2.exe reports „read only“. Reset the PIN in the menu item „admin password“ to „0000“ to make the SUT50 accessible via LAN. -
Page 21: Digital-Joystick Emulation
Make sure to save the settings by selecting the menu item „save changes“. Parameterisation of the videomatrix The SUT50 is suitable to operate with the videomatrix systems of the SIMATRIX- series and the VM1000. Depending on the chosen interface and purpose the Videomatrix-System must be configured as well. -
Page 22: Maintenance
Maintenance Maintenance Cleaning For cleaning use only a clean dry cloth – Do not use liquid cleaning agents or spray – Transport and storage Keep the original device packaging for later transports – Do not expose the device to mechanical shocks –... -
Page 23: Appendix
Systems and -Servers via Current Loop (20mA, 2400 Bd), V24, or optionally RS485 Via UDP/IP to the SIMATRIX-Server or another SUT50 in console router mode. Baudrate of the Serial Interface 2400 to 19200* Baud/sec. adjustable Baudrate depends on operation mode and system... -
Page 24: Standard-Keyboard Layout
Appendix 11.2 Standard keyboard layout Factory made the buttons of the HMI device are labeled for alert program 2. (see il- lustration below) The provided CD contains a file to print the keyboard layout. Important: Entering a PIN (see Chapter 7.1.4) is only possible, when the keyboard layout matches one of the two layouts illustrated in Fig. - Page 26 Issued by Pelweckyj Videotechnik GmbH Güterstraße 2 64807 Dieburg Germany info@pelweckyj.de Issue 06.2014...