Contents 1. Projector Firmware Upgrade Setup ..................2 Part A: Connect the Mini USB Cable and Enter Download Mode .......... 2 Part B: Launch the Firmware Downloader Tool to Upgrade Projector Firmware .... 3 2. Multimedia Firmware Upgrade Setup ..................5 Part A: Enable Wireless or LAN on the Projector ................ 5 Part B: Connect Your Computer to the Projector and Login Web Management ...
1. Projector Firmware Upgrade Setup Part A: Connect the Mini USB Cable and Enter Download Mode 1. Plug in the power cord and perform following steps to enter download mode. NOTE: Please DON’T press power button to turn on the projector when entering download mode.
Part B: Launch the Firmware Downloader Tool to Upgrade Projector Firmware 3. Double-click DDP442X Firmware Downloader.exe from downloader Projector FW folder. NOTE: The DDP442X Firmware Downloader tool does not support Mac OS. 4. DDP442X Firmware Downloader is executing and please checks USB status is Connected (Projector found) before upgrade firmware.
Page 5
WARNING: When you are in downloading mode, PLEASE do not press the keyboard. Step E: Firmware download completed, click “OK” and plug out the Min USB cable from projector. 6. Unplug and re-plug in the power cord to turn on S520 projector. 4 ...
2. Multimedia Firmware Upgrade Setup Part A: Enable Wireless or LAN on the Projector 1. Connect the power cable and turn on the projector by pressing the power button. 2. If the LAN cable is used for firmware upgrade, follow these steps to re-active Wireless and LAN feature when the Wireless and LAN is Disabled.
Your computer must have wireless network function to detect the connection. When you connect to the S520 wireless network, you will lose wireless connectivity with other wireless network. 6. Open the Internet browser on your computer. You will be automatically directed to the Web Management page.
Part C: Upgrade Multimedia Firmware 7. The S520 web management page opens. Click Admin. 8. Enter the administrator password (default password is admin), then click Login. 9. Click Firmware Upgrade. 10. Follow these steps to upgrade firmware: Step A: Click “Browse” to find the firmware (*.nad) from downloaded Multimedia FW folder.
Page 9
Step B: Click the “Update” to start the upgrade firmware (*.nad). Step C: Download and upgrade firmware (*.nad). Step D: Firmware (*.nad) completed, click the “OK”. 8 ...
3. Camera MCU Firmware Upgrade Setup Part A: Connect the Mini USB Cable 1. Connect the power cable and turn on the projector by pressing the power button. 2. Connect the Mini USB (5 m) cable to the projector and the computer. 3.
Part B: Launch the Camera MCU Upgrade Tool 4. Execute the “SP10-ISP-Writer-0.08.exe” firmware upgrade tool from downloaded Camera MCU folder, the current connection status is Disconnected. 5. Wait around 10sec then click the “Connect” button. 6. Confirm the connection status is changed to “Connected”. 10 ...
Part C: Upgrade Camera MCU Firmware 7. Click the “AP ROM” button to find the “SP10-V02-1.2.4-Dell.bin” from downloaded Camera MCU folder. 8. Click the “Start” button to upgrade the camera MCU firmware. 11 ...
4. Camera Driver Firmware Upgrade Setup Part A: Connect the Mini USB Cable 1. Connect the power cable and turn on the projector by pressing the power button. 2. Connect the Mini USB (5 m) cable to the projector and the computer. 3.
Part B: Launch the Camera Driver Upgrade Tool 4. Execute the “SP10-RPD-Writer-0.09.exe” firmware upgrade tool from downloaded Camera Driver folder, the current connection status is Disconnected. 5. Wait around 10sec then click the “Connect” button. 6. Confirm the connection status is changed to “Connected”. 13 ...
Part C: Upgrade Camera Driver Firmware 7. Click the “CD ROM” button to find the “TouchDriver.iso” from downloaded Camera Driver folder. 8. Select program “CD ROM”, and then click the “Start” button to upgrade the camera driver firmware. 14 ...