Maintenance And Safety Inspection - Hitachi L44 Instruction Manual

6.

Maintenance and Safety Inspection

1) After using the probe and the elasto coupler, it should be cleaned
and disinfected or sterilized following "5. Reprocessing Procedure",
then store it in a cool and dark place avoid high temperature
and humidity, direct sunlight.
2) Visually inspect the surface of the probe head, the housing, the
cable and the connector for any crack, scratch or
denaturalization. If you find any damage, do not use the probe,
and contact a service support immediately.
3) Visually inspect the surface of the elasto coupler for any crack,
deformation or denaturalization. If you find any damage, do not
use the elasto coupler, and immediately contact a service
support.
( 19 ) Q1E-EP1370