Transmitter Troubleshooting Setup; Amps Tx Setup - Nokia 6015 Troubleshooting - Rf

Nokia Customer Care

Transmitter Troubleshooting Setup

Use the following sections to set up troubleshooting in Phoenix according to the band
you are using:
• "AMPS TX Setup"
• "Cell TX Setup"
• "PCS TX Setup"

AMPS TX Setup

Use the following procedures to prepare for AMPS TX troubleshooting using Phoenix.
1. Connect RF test connector to a call box.
2. Connect the phone to a PC via the bottom connector, and connect a power
supply.
3. Open the Troubleshooting menu, and click Phone Control.
The Phone Control dialog box appears.
4. On the Phone Control dialog box, click the LOCAL button in the Phone State
area to put the phone into Local Mode.
5. Open the Troubleshooting menu, point to AMPS, and click AMPS Control.
Issue 1 08/2004
6015/6015i/6016i/6019i (RH-55), 6012 (RM-20)
Figure 7: Phone Control dialog box
©2004 Nokia Corporation
Troubleshooting - RF
Company Confidential Page 13