Registering Connected Devices; Checking And Registering Connected Devices - Canon CR-G100 Instruction Manual

4 Configuration

Registering Connected Devices

Click the [Register] tab to display the [Register Devices] screen. In this screen you can check the connection status of the
main capture camera, lens, camera head, wide view camera and eyepiece camera, and register them as part of the system.
Except for the robotic camera head's model name, the information displayed is obtained automatically from the
connected devices.
1 Device
2 Status (connection status)
3 Model
 For the robotic camera head, you can enter any text string (up to 100 characters) that will be used as 'model
name'.
4 [Register] button
 Checking and Registering Connected Devices
1. Check the connection status and model name of the connected devices.
 If the status of the connected device is shown as [Disconnected] or if the model name is not displayed, check
that the device is turned on and correctly connected.
2. Only when using a camera head
name.
3. Once all the connected devices are shown with a correct [Connected] status, click [Register] to register
the devices.
 As long as a main capture camera is not registered, the [Register] button will be disabled and you will not be
able to register other devices.
Enter a name that will appear as the robotic camera head's model
17
Registering Connected Devices