Table of Contents
Advertisement
Installation
Installing modules
3.7.9
Installing a CTR-
The line length of the analog stations is restricted to 100m when using comfort
telephones.
Installation Procedures
Step
1.
Turn off the power supply.
2.
Remove the system's cover
3.
Attach the module to the corresponding Connector on the MB
4.
Reassemble the entire set.
5.
"Performing a visual inspection" on page 3-35.
6.
Turn on the power supply.
7.
Configure the required data (see Service Manual).
Assembly Diagram
Figure 3-11
Installing a CTR- U
3-26
module
U
P0/E
Procedure
HiPath 1120 module
P0/E
HiPath1120, Installation Guide
Advertisement
Table of Contents
