About This Documentation; Overview - Target Groups & Product Phases; Intended Audience; Availability - Bosch Rexroth NYCe 4000 Instructions Manual

NYCe 4000 Multi-axis motion control
system

1 About this Documentation

1.1 Overview – target groups & product phases
The target groups, product phases and activities that can refer to this document
are marked in rounded boxes in the following figure.
Product
Selection
phases
Presales Aftersales
Design engineer
Programmer
Technologist
Target
Process
groups
specialist
Select
Prepare
Activities
Design
Construct
Fig. 1-1: Target groups, product phases and activities

1.2 Intended audience

This document explains technical and service personnel of the machine builder
how to safely install the drive module mechanically and electrically. This
document is not the usage manual.

1.3 Availability

These Instructions are part of the drive module product delivery and must
always be available for the user. If the drive module is handed over to another
person, these Instructions must be handed over as well.
Mounting
Engineering
(assembly/installation)
Mechanic/
electrician
Programmer
Commissioning engineer
Unpack Parameterize
Mount Program
Install Configure
Simulate
About this Documentation
Commissioning Operation
Technologist
Process specialist
Machine
operator
Maintenance
technician
Service
Optimize Operate
Test Maintain
Remove
faults
Create
the NC program
R911337375_Edition 06 Bosch Rexroth AG
1/19
Decommissioning
Mechanic/
electrician
Disposal company
Dismount
Dispose