Brother DCP-117C Quick Setup Manual page 12

Step 2
For Mac OS
Make sure that you have completed the instructions from Step 1 "Setting Up
the Machine" on pages 2 - 6.
1
Disconnect the machine from the power
socket and from the Macintosh
already connected an interface cable.
2
Turn on your Macintosh
3
Insert the supplied CD-ROM into your
CD-ROM drive.
4
Double-click the Start Here icon to install
the printer and scanner drivers. If the
language screen appears, select your
language.
5
Click MFL-Pro Suite to install.
6
Follow the on-screen instructions, and
restart your Macintosh
7
Connect the USB interface cable to your
Macintosh
machine.
To connect the USB cable to the machine:
1. Open the scanner cover to its open
position.
2. Connect the USB cable into the USB
socket, marked with a
will find the USB socket above and to the
left of the ink cartridge slots, as shown
below.
3. Carefully guide the USB cable into the
trench as shown below, following the
trench round and toward the back of the
machine.
10
Installing the Driver & Software
®
9.1 to 9.2
®
, if you have
®
.
®
.
®
, and then connect it to the
symbol. You
DO NOT connect the machine to a
USB port on a keyboard or a non
powered USB hub.
8
Turn on the machine by plugging in the
power cord.
9
®
From the Apple menu, open the Chooser.
0
Click the Brother Ink icon you installed. On
the right side of the Chooser, select the
printer to which you want to print.
Close the Chooser.
The Brother Printer driver and Scanner
driver have been installed.
A
®
To install Presto! PageManager
Presto! PageManager icon and follow the
on-screen instructions.
You can easily scan, share and organize
photos and documents using Presto!
®
PageManager .
®
Presto! PageManager
installed and the installation is now
complete.
®
, click the
®
®
has been