Installing The Ink Cartridges - Brother DCP-117C Quick Setup Manual

Step 1
Installing the Ink
6
Cartridges
Warning
If ink gets in your eyes wash them with water
immediately, and if irritation occurs consult a doctor.
1
Make sure that the power is turned on.
The LCD shows:
No Cartridge
2
Lift the scanner cover from the right-hand
side of the DCP until it locks securely into
the open position.
Scanner Cover
3
Remove the protective parts.
Do not throw away the protective parts.
You will need them when you transport the
machine.
4
Setting Up the Machine
4
Take out the ink cartridge.
5
Carefully remove the buttom cap.
DO NOT touch the area shown in the
illustration below.
Opening
If the cartridge cover comes off when you
open the bag the cartridge will not be
damaged.
Keep the ink cartridge in an upright position
when you insert it into the slot.
OK OK OK