Automatic Safety Switch-Off Function; Basic Settings - Siemens EH Series User Manual

en Automatic safety switch-off function
10.3 Automatic childproof lock
The hob is equipped with an automatic childproof lock.
This prevents children from switching on the hob.
11

Automatic safety switch-off function

If you operate a cooking zone for an extended period
and do not change any settings, the automatic safety
shut-off is activated. This depends on the selected per-
formance level from 1 to 10 hours.
The cooking zone stops heating.
heat indicator or flash alternately in the cooking
zone display.
12

Basic settings

You can configure the appliance to meet your needs.
12.1 Basic settings table
Display Function
⁠
Childproof lock
1
Manual.
Automatic.
Function deactivated.
⁠
Audible signals
Confirmation and fault signals are deac-
tivated.
Only the fault signal activated.
Only the confirmation signal is activated.
All signal tones are activated.
⁠
Automatically programming the cooking
time
Switched off.
⁠ ⁠ - Time until automatic switch-off.
⁠
Duration of the timer end signal tone
10 seconds.
30 seconds.
1 minute.
⁠
Power management function. Limit the
total power of the hob
. The available settings depend on the
maximum power of the hob
Deactivated. Maximum power of the
12
hob.
1000 W minimum power.
. 1500 W.
...
3000 W. Recommended for 13 A.
. 3500 W. Recommended for 16 A.
4000 W.
. 4500 W. Recommended for 20 A.
...
or . Maximum power of the hob.
1
Factory setting
2
The hob's maximum power is shown on the rating
plate.
12
and the residual
1
1
1
2
Activating and deactivating
You can find more information about the automatic
childproof lock under
→ "Basic settings", Page 12.
To switch off the display, touch any symbol. You can
restart the cooking zone.
Display Function
⁠
Time for selecting the cooking zone
Unlimited: The cooking zone that was
last set remains selected.
Limited: The cooking zone only remains
selected for a few seconds.
⁠ ⁠
Checking cookware, result of the cook-
ing process
Not suitable.
Not optimal.
Suitable.
⁠
Restoring factory settings
Individual settings.
Factory settings.
1
Factory setting
2
The hob's maximum power is shown on the rating
plate.
12.2 To go to the basic settings
Requirement: The hob must be switched off.
To switch on the hob, touch
1.
Within the next 10 seconds, touch and hold
2.
four seconds.
Product information
Directory for the technical after-sales
service (TK)
Production number
Production number 1
Production number 2
a The first four displays provide the product informa-
tion. Touch or to view the individual displays.
1
1
⁠ .
for
Display
⁠
⁠ ⁠ .
⁠ .