Using The Reports Key - Brother FAX-775 Owner's Manual

3
Enter the time to begin printing, in 24-hour format, and then press Menu/Set.
(For example: enter 19:45 for 7:45 PM.)
4
Press Stop/Exit.

Using the Reports Key

Press Reports, then press
Menu/Set.
Six reports are available:
Don't forget to set up the Fax Activity Report and Transmission Verification
Note
Report as explained on page 10-1.
10 - 2
P R I N T I N G R E P O R T S
to select the report you want, and then press
or
Prints the Menu Table and programming
instructions so you can see at-a-glance how to
quickly program every menu selection.
Lists names and numbers stored in One Touch
and Speed Dial memory, in numerical order.
Lists information about the last 30 incoming
and outgoing faxes. TX means Transmit; RX
means Receive.
Prints a Transmission Verification Report for
your last transmission.
Lists settings for
RECEIVE, SETUP
REPORTS, and
for REMOTE FAX OPT
Lists summary information of stored faxes and
the percentage of used memory.
INITIAL SETUP,
SEND, SETUP
TEL SERVICE. The settings
are included.
SETUP