D-Link DAP-3712 User Manual page 27

Section 3 - Configuration
Edit
Click this to change the DAP-3712's operation mode, encryption
and key. The following page will pop up:
SSID: To set the SSID which the DAP-3712 will broadcast
when it operates in Access Point or Access Point
(WDS) or SSID mode, or the SSID that the DAP-
3712 will attempt to connect to when it operates
in Client or Client (WDS) mode.
Hidden SSID: When the DAP-3712 is in Access Point or Access
Point (WDS) mode, this function will be displayed.
Use this to hide the broadcast name of the wireless
network.
Wireless There are four wireless modes: Access Point, Client,
Mode : Access Point (WDS), and Client (WDS). To use a
point-to-point or point-tomultipoint
connection, you need to configure the primary
DAP-3712 in Access Point or Access Point (WDS)
mode and the other
DAP-3712s in Client mode or Client (WDS) mode.
If you want to preserves MAC address of clients
frame , it is suggest to use Acess Point(WDS) and
Client (WDS) for each size.
Encryption:
You can select which Wi-Fi encryption the DAP-
3712 should use: Open, WPA-PSK, WPA2-PSK,
WPA/WPA2 Hybrid-PSK, or IEEE802.1X.
Key:
To input the WiFI encryption key. The default key
is 1234567890abc
D-Link DAP-3712 User Manual 27