Brother MFC MFC-790CW Quick Setup Manual page 20

USB
For USB Interface Users (For Mac OS
23
Before you install
a
Make sure your machine is connected to the
power and your Macintosh
be logged on with Administrator rights.
Important
®
• For Mac OS X 10.2.0 to 10.2.3 users,
upgrade to Mac OS
the latest information for Mac OS
http://solutions.brother.com/)
• Make sure there are no memory cards or a
USB Flash memory drive inserted.
24
Connect the USB cable
Important
• DO NOT connect the machine to a USB port
on a keyboard or a non-powered USB hub.
• Connect the machine directly to your
®
Macintosh .
a
Using both hands, use the plastic tabs on both
sides of the machine to lift the scanner cover
until it locks securely into the open position.
20
®
is ON. You must
®
X 10.2.4 or greater. (For
®
X, visit
Macintosh
®
X 10.2.4 or greater)
b
Connect the USB cable to the USB socket
marked with a
USB socket inside the machine on the right as
shown below.
LAN USB
c
Carefully route the USB cable through the
trench and out the back of the machine as
shown below and connect the cable to your
®
Macintosh .
Important
Make sure that the cable does not restrict the
cover from closing, or an error may occur.
d
Lift the scanner cover to release the lock a.
Gently push the scanner cover support
down and close the scanner cover c.
b
2
®
symbol. You will find the
1
3