Table of Contents
Advertisement
INITIAL PREPARATIONS
• The camera voltage regulator board
(VRB) accepts an input voltage of either
12V dc or 24V ac, and a range in-between,
from a regulated power supply.
• The VRB automatically switches between
ac or dc inputs, therefore no internal wiring
changes are necessary to accommodate
these input voltages.
• Determine the optimum location for the
camera.
• All cameras have been tested prior to
shipment.
GUIDELINES
The installation of the EX70and EX70N is
explained in Sections 1 to 5 listed below.
It is important that these steps are followed in
sequence:
1. Cover Removal
2. Input Power Connections
3. Mounting - Camera Base
4. Camera / LED Array Adjustments
5. Camera Re-Assembly
3
Advertisement
Table of Contents
