Table of Contents
Advertisement
Section 4
IEC 60870-5-103
<12> MEASUREMENT WITH QUALITY
OV
OV
OV
Time stamp (CP56Time2a)
4.6
Special information and instructions for configuring
the control system
Private range
Provision is made in the event configuration (see
private IEC 60870-5-103 definition for each REB500 signal.
The input fields for REB500 signals covered by the public part of the standard (see
have a bright yellow background their default setting
information number. All other signals receive the presetting
information number. A signal defined for protocol 60870-5-103 that is not in the public range
and has
the protocol.
A private IEC 60870-5-103 definition can be entered for every REB500 signal in this dialog. The
Set Default button is enabled for a signal in the public range of the protocol so that the ABB
default setting can be restored at any time.
The limitations specified in the standard must be observed when assigning information
numbers. The latter must be within the following ranges:
16-52; 73; 128-130; 64-72; 74-93
IEC18000627 V1 EN-US
Figure 7:
24
Current value <1>
DATA STRUCTURE <23>
21
1,0
DESCRIPTOR
2
3,0
ER
RES
MVAL (4 .. 8)
MVAL (9 .. 16)
ER
RES
MVAL (4 .. 8)
MVAL (9 .. 16)
ER
RES
MVAL (4 .. 8)
MVAL (9 .. 16)
BINARY TIME 7
<14>
1,0
0 set for function type and information number is transmitted via the generic part of
Private IEC 60870-5-103 definition
© 2019 - 2020 Hitachi Power Grids. All rights reserved
Kind of description
KOD
DATA TYPE
DATA SIZE
GDD
NUMBER, CONT
DATA TYPE
DATA SIZE
GDD 1
NUMBER, CONT
3 or 4 (including measurement
L0)
GID 1a
GID 1b
GID 1 c
DATA TYPE
DATA SIZE
GDD 2
NUMBER, CONT
GID 2
Section
3.3) for the user to enter his own
0 for both IEC function type and
Communication protocol manual IEC 60870-5-103
1MRK 511 451-UEN Rev. C
GUID-A8AF440A-22B6-4443-B341-64B408B162ED v3
Section
0 for the IEC function type and the
14000052-IEC18000627-1-en.vsdx
Distributed busbar protection REB500
4.2)
Advertisement
Table of Contents
