Hitachi ABB RELION REB500 Communication Protocol Manual page 5

Distributed busbar protection
Table of Contents

Advertisement

Disclaimer
The data, examples and diagrams in this manual are included solely for the concept or product
description and are not to be deemed as a statement of guaranteed properties. All persons
responsible for applying the equipment addressed in this manual must satisfy themselves that
each intended application is suitable and acceptable, including that any applicable safety or
other operational requirements are complied with. In particular, any risks in applications where
a system failure and /or product failure would create a risk for harm to property or persons
(including but not limited to personal injuries or death) shall be the sole responsibility of the
person or entity applying the equipment, and those so responsible are hereby requested to
ensure that all measures are taken to exclude or mitigate such risks.
This document has been carefully checked by Hitachi Power Grids but deviations cannot be
completely ruled out. In case any errors are detected, the reader is kindly requested to notify
the manufacturer. Other than under explicit contractual commitments, in no event shall
Hitachi Power Grids be responsible or liable for any loss or damage resulting from the use of
this manual or the application of the equipment.
ABB is a registered trademark of ABB Asea Brown Boveri Ltd. Manufactured by/for a Hitachi
Power Grids company.

Advertisement

Table of Contents
loading

Table of Contents