Maintenance; Replacing The Air Filter - ABB Endura AZ20 Instruction

E N D U R A A Z 2 0 , A Z 2 5 , A Z 3 0 | P U M P E D R E F E R E N C E A I R U N I T | I N F 0 9/0 2 7- E N R E V. F
3

Maintenance

Replacing the air filter

NOTICE
Isolate the pump from power and air supplies before
replacing the air filter.
1 Remove the pump cover – see Accessing the terminal block,
page 5.
Referring to Figure 6:
2 Disconnect tube A from air filter
3 Disconnect tube C from air filter
4 Release clip D and carefully remove air filter
it out of the clip.
5 Discard air filter
B .
6 Fit a new filter by reversing steps 1 to 4.
Figure 6 Replacing the air filter
B .
B .
B by pulling
7