Routine Maintenance; Charging The Battery - Brother DECT BCL-D70 User Manual

Error Message Cause
The machine (base unit) is in Power
Power Off
Save mode.
The cordless handset is too far
Searching for
away from the machine (base unit).
Base Unit
Your machine (base unit) is not
(Base Unit
plugged in.
not detected)
You have not registered the
cordless handset.
The antenna on the right of the
machine (base unit) is in the down
position.

Routine maintenance

Charging the battery

If the battery charge level is getting low, you
should charge the battery. You can see the
battery charge level indicator at the bottom
right of the LCD.
a
Make sure the AC adapter of the cradle
or the machine (base unit) is connected
to an electrical socket.
Troubleshooting and Routine Maintenance
Action
If you want to make a phone call, press the
Power Save key on your machine (base unit) to
bring your machine out of Power Save mode.
Then press
handset to go back to standby mode.
Move the cordless handset closer to the
machine (base unit).
Make sure that the machine (base unit) is
plugged in.
Register the cordless handset. (See Registering
cordless handsets on page 3.)
Make sure the antenna is in the up position.
b
Place the cordless handset in the cradle
with the dial pad facing forward.
4
4
on the cordless
25
4