Table of Contents
Advertisement
Chapter 1
Control panel overview
Quality
Enlarge/Reduce
Ratio:
Paper Type
1 LCD (liquid crystal display)
Displays messages on the screen to help you
set up and use your machine.
Also, you can adjust the angle of the LCD
display by lifting it.
2 Menu keys:
d or c
Press to scroll backward or forward to a
menu selection.
Also, press to choose options.
a or b
Press to scroll through the menus and
options.
Clear/Back
Press to cancel the current setting.
Menu
Lets you access the main menu to program
the machine.
OK
Lets you choose a setting.
3 Number of Copies
Use this key to make multiple copies.
4 Start keys:
Colour Start
Lets you start making copies in full colour.
Also lets you start a scanning operation (in
colour or mono, depending on the scanning
setting in the ControlCenter software).
6
Normal
100%
100%
Plain Paper
Mem.
5
6 On/Off
7 Ink Management
8 Mode keys:
9
Mono Start
Lets you start making copies in
monochrome. Also lets you start a
scanning operation (in colour or mono,
depending on the scanning setting in the
ControlCenter software).
Stop/Exit
Stops an operation or exits from a menu.
You can turn the machine on and off.
If you turn the machine off, it will still
periodically clean the print head to maintain
print quality.
Lets you clean the print head, check the print
quality, and check the available ink volume.
Scan
Lets you access Scan mode.
PhotoCapture
Lets you access PhotoCapture Center™
mode.
Warning LED
Turns red when the LCD displays an error or an
important status message.
1
Advertisement
Table of Contents
