Entering Photocapture Mode; Print Images; View Photo(S) - Brother DCP-770CW User Manual

Entering PhotoCapture mode

After you insert the memory card or USB
Flash memory drive, press the
(PhotoCapture) key to illuminate it in
green and display the PhotoCapture options
on the LCD.
The LCD shows:

View Photo(s)

Print Index Print Index
Print Photos Print Photos
Photo Effects Photo Effects
Search by Date Search by Date
Print All Photos Print All Photos
PHOTO
Press a or b to scroll through the
PhotoCapture key options.
View Photo(s) (See page 33.)
Print Index (See page 34.)
Print Photos (See page 34.)
Photo Effects (See page 35.)
Search by Date (See page 38.)
Print All Photos (See page 39.)
Slide show (See page 39.)
Trimming (See page 40.)
Note
If your digital camera supports DPOF
printing, see DPOF printing on page 40.
When the option you want is highlighted,
press OK.
Printing photos from a memory card or USB Flash memory drive
5
View photos on the LCD View photos on the LCD
and select the images and select the images
you want to you want to
print. print.
Select & Press OK

Print Images

View Photo(s)
You can preview your photos on the LCD
before you print them. If your photos are large
files there may be a delay before each photo
is displayed on the LCD.
a
Make sure you have put a memory card
or USB Flash memory drive in the
correct slot.
Press (PhotoCapture).
b
Press a or b to choose
View Photo(s).
Press OK.
c
Press d or c to choose your photo.
d
Press + or - repeatedly to enter the
number of copies you want.
e
Repeat step c and step d until you
have chosen all the photos.
f
After you have chosen all the photos, do
one of the following:
Press OK and change the print
settings. (See page 41.)
If you do not want to change any
settings, press Colour Start to print.
5
5
5
33