Brother FAX 1920CN User Manual page 121

Remote commands
95 Change the Fax Forwarding
or Paging settings
1 OFF
2 Fax Forwarding
3 Paging
4 Fax Forwarding number
6 Fax Storage ON
7 Fax Storage OFF
96 Retrieve a fax
2 Retrieve all faxes
3 Erase faxes from the
memory
97 Check the receiving status
(MFC-3320CN only)
1 Fax
97 Check the receiving status
(FAX-1920CN only)
1 Fax
2 Voice
98 Change the Receive Mode
(MFC-3320CN only)
1 External TAD
2 Fax/Tel
3 Fax Only
8 - 7 REMOTE FAX OPTIONS
Operation details
If you hear one long beep, the change has
been accepted. If you hear three short beeps,
you cannot change it because the conditions
have not been met (for example, registering a
fax forwarding or paging number). You can
register your Fax Forwarding number by
entering 4. (See Changing your Fax
Forwarding number on page 8-9.) Once you
have registered the number, Fax Forwarding
will be set to On .
You can turn Fax Storage to On (or Off
after you have retrieved or erased all your
messages).
Enter the number of a remote fax machine to
receive stored fax message(s). (See page
8-9.)
If you hear one long beep, you can erase fax
messages from the memory.
You can check whether your machine has
received any faxes. If yes, you will hear one
long beep. If no, you will hear three short
beeps.
You can check whether your machine has
received any FAX or VOICE messages. If
yes, you will hear one long beep. If no, you will
hear three short beeps.
If you hear one long beep, you can change
the Receive Mode.