Setting The Paper Size (Mfc-3320Cn Only); Setting The Ring Volume - Brother FAX 1920CN User Manual

Setting the Paper Size (MFC-3320CN only)

You can use two sizes of paper for printing your faxes and copies:
letter and legal. When you change the type of paper you load in the
machine, you will need to change the setting for Paper Size at the
same time so your machine can fit an incoming fax on the page.
1
Menu/Set
Press
2
Press
Letter or Legal .
Menu/Set
Press
3
Stop/Exit
Press
For PhotoCapture Center and Copy Options, you can also
change the paper size to photo card size (4" × 6") for the next
copy or printout only.
(See Paper Size on page 11-8 and Paper & Size on page 12-9.)

Setting the Ring Volume

You can adjust the ring volume when your machine is idle (not being
used). You can turn the ring Off or you can select the ring volume
level.
1
Menu/Set
Press
2
Press
( Low , Med , High or Off ).
Menu/Set
Press
3
Stop/Exit
Press
—OR—
In Fax mode, press
you press these keys, the machine will ring so you can hear the
active setting as the LCD shows it. The volume changes with each
key press. The new setting will stay until you change it again.
4 - 7 GETTING STARTED
1 3
, , .
or to select
.
.
1 4 1
, , , .
or to select
.
.
or to adjust the volume level. Every time
3.Paper Size
1.Ring